Technical data sheet for
GAS COOKTOPS 600mm
G514D-B, G514D-CB, G514D-LS,
G514C-B, G514C-CB, G514C-LS,
G514B-B, G514B-CB, G514B-LS
Heavy-duty construction
28 MJ/hr open burners
Flame failure standard
Pilot burners optional
300mm griddle plate options
Optional simmer plates
3 models of base unit
Rear rollers
Stainless steel exterior
Easy clean
Easy service
Fully modular
G514D-LS
Overall Construction
Controls
Cooktop
• Variable high to low controls to open burners
• Welded hob with 1.5mm 304 stainless steel bull nose
• Side panels 1.2mm 304 stainless steel
• Splashback 1.2mm 304 stainless steel
• Vitreous enamelled control panel
• Aluminised steel internal construction
• Cast iron 28MJ/hr open burners with forged brass cap
• Vitreous enamelled cast iron potstands
• Vitreous enamelled open burner spill covers
• Cast iron simmer plates (optional extra)
• 12mm thick mild steel griddle plate
• 2.5mm 304 stainless steel griddle splash guards
• Stainless steel spill trays
• Open burners flame failure standard with pilot burners optional
• Variable high to low controls to griddles
• Griddles standard with pilot, flame failure and piezo ignition
• Large easy use control knob - heat resistant reinforced
• Easy view control settings on knob
Cleaning and Servicing
• All models with easy clean stainless steel external finish
• Lift off burner heads and vitreous enamelled burner spill covers
• Stainless steel spill trays under open burner and griddle sections
• Access to all parts from front of unit
Griddle sections are standard on RH side. Available on LH side to
order or by conversion.
Bench mount (supplied as –B model)
• Four 63mm dia. heavy-duty 1.2mm 304 stainless steel bench legs
with adjustable feet
• Adjustable height 80mm – 105mm
Cabinet base (supplied as –CB model)
• Fully modular for match suite finish
• Double skin 0.9mm 304 stainless steel interior and exterior
• Optional GN 1/1 4 position racking kit
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two
adjustable feet at front and two rollers at rear
Leg stand (supplied as –LS model)
• Fully modular for matched suite finish
• Framed top for connection to Cooktop
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two
adjustable feet at front and two rollers at rear
• Fully modular framed stand shelf with 0.9mm 304 stainless
steel finish
• Suitable for rear or through shelf gas connection to Cooktop
• Quick assembly design
|
iHome IH K210MB User Manual
JVC CU VD20U User Manual
Lenovo 6627 4AE User Manual
LG Electronics 47WV30BS User Manual
Lincoln Impinger Conveyor Ovens 1100 Series User Manual
Manhattan Computer Products 100786 User Manual
Microsoft Computer Hardware GFK 1167B User Manual
Moffat RN8800G CB User Manual
Philips Brilliance 201B40 User Manual
Philips Computer Monitor 29PFL4508 User Manual